TECHNICAL DETAILS

HEIGHT 1200 mm.

LENGTH 1100 mm.

WIDTH 1100 mm.

N° OF TURNS SAW 1600 (on request variable) WITH INVERTER 0 - 1600 WITHOUT INVERTER 1600 FIXED

MAXIMUM SAW DIAMETER 80 mm

MINIMUM LENGTH TO BE CUT 0 mm.

MAXIMUM ROD DIAMETER 10 mm.

SAW HOLE DIAMETER 16 mm.

MAXIMUM LE NGTH TO BE CUT 40 mm.

PRECISION OF THE CUT 0,02 mm

N° PIECES/MINUTE 30-45 IT DEPENDS ON THE TIME OF ADVANCE OF THE AIR PRESSURE 4 Atm

FEEDING 380 - 220 Volt.

POWER 0,75 kW

WEIGHT 160 Kg.

WEIGHT WITH PACKING 260 Kg.

SIZES OF THE PACKING 1480 X 1170 X h1170

T he machine is particularly suitable to saw pieces automatically because it is provided with a pneumatic system for the cod progress to be cut, which can be full a hollow. The recovery of the pieces is simplified from a collect ion basket. The machine is equipped of a lubrication plant for the blade with li q uid recycle. It can be used for different type of works using the wide plane prepared with an adjus able guide. The leaning of the blade from the working plane can be adjusted by an adequate hand wheel. Two adjustable brass smal l blocks are used to keep the blade in a lateral guide. Through the door, it is possible to enter into the oil decantation tank and go to the lubrication pump. The change of the saw is made easier from the plane rotation.