TECHNICAL DETAILS

HEIGHT 1050 mm

LENGTH 1050 mm

WIDTH 500 mm

MAX DIAMETER THREADED OR SMOOTH PIN 100mm

MAX. TUBE DIAMETER TO WIND UP ON SMOOTH P IN 6 mm

MAX. SOLID WIRE DIAMETER TO WIND UP ON SMOOTH PIN6 mm

MAX. DIAMETER HELIX OVAL PIN 16 mm

MAX. WIRE DIAMETER TO WIND UP ON HELIX OVAL PIN 3 mm

SPINDLE ROTATION SPEED VARIABLE IN BOTH DIRECTIONS 0 - 200 T/Min

FEEDING 220 Volt SINGLE - PHASE

POWER 1 ,2 kW WEIGHT Kg. 192

WEIGHT WITH PACKING 202 Kg.

SIZES OF THE PACKING 1200 X 850 X h12

Many function machine studied and realised for making all the types of coiling with solid wires and made from plate. With ad e quate equipment you can form spirals with tube or open pipes starting from plate, obtaining links for chains, earrings and bracelets. It is composed of a sheet basement and of a winding pincers - holder group, which can make the expulsion of the spiral with wire and the simple coiling, by means of an equipment - holder group (wire - guide, plate - guide, dies to form round and shaped pipe, etc.) assembled on a special guide at liner slide of a very big precision and strength. The motorization is obtained from a ratio - motor, which is co n trolled by an inverter for obtaining the speed change of the pincers - holder spindle. Coiling the wire, you can o b tain spirals of many different shapes (round, oval, rectangular etc.) through adequate shaped pins and particular device, which a l lows the spiral expulsion from the pin during the coiling phase. During the tube or pipe coiling with different shapes (round, oval, triangular, squ are section etc.) it is possible to obtain spirals of predetermined length by the use of particular equipment.