TECHNICAL DETAILS

LENGTH 1240 mm

WIDTH 600 mm

HEIGHT 1390 mm

NET WEIGHT 1475 Kg GROSS WEIGHT 1575 Kg

PRESSING FORCE 245 TONS

WORKING PRESSURE UP TO 350 Atm

MAXIMUM OPENING BETWEEN THE WORKING PLANS 165 mm PORT BETWEEN THE UPRIGHTS 310 mm

DEPTH OF THE BOARDS 360 mm

PISTON DIAMETER 250 mm

MOTOR POWER 4 kW

OIL FOR THE GEAR CASE 50 Kg

The machine has been studied to mainly carry out plating works. The working space consists of a lower and upper plate, connected and fixed to each other by two uprights, suitably studied, for resis t ing to the working pressure of the machine. The pressure roll, which is situated inside the structure, consents the up and down of the working plan. The whole body is standing and fixed on a sturdy base - plate made of iron sheet, inside which, through suitable inspection panels, you can accede to the motor and the hydraulic gearbox. The setting at work of the machine is carried out through a ge n eral switch. The range of the working plan is made by the use of a distributor of oil flux. The requested pressure between the t wo plans, can be verified on the special manometer and can be a d justed through the pressure regulator