TECHNICAL DETAILS

HEIGHT 1240 mm

WIDTH 550 mm

LENGTH 1360 mm

PASSAGES OF DRAWING N. 6

DRAWING SPEED FROM 0 TO 90 Mt/1°

MAX. D IAMETER INGOING WIRE 2 mm

MIN. DIAMETER OUTGOING WIRE 0,20 mm

REEL WITH ADJUSTABLE CLUTCH

POWER MAIN MOTOR 3 Hp

POWER MOTOR PUMP 0,5 Hp

FEEDING 380 Volt

WEIGHT 300 Kg WEIGHT WITH PACKING 460 Kg

SIZES OF THE PACKING 1600 x 800 x h1480

The machine has been constructed on a sturdy, metallic frame in order to avoid any vibration. The adjustment of the drawing on the coiler reel is carried out through a clutch device. The primary traction cone is out of hardened steel in order to allow a major duration during the time. The housing of the drawing dies is projec ted for dies with a maximum diameter of 30 mm. The coiler reel is out of cast iron and is extractable, while the decoiler plate is supplied with a stop of the machine, in case of an irregular decoiling of the wire. The lubrication is forced by an incorpora ted motor - driver pump. The collection basin of the refrigerant is divided for the recovery of the remaining wire. The machine ha s been conceived in a special way, to facilitate the installation of the drawing dies. The machine is provided of winder device for spools 120 DIN.