TECHNICAL DETAILS
HEIGHT 700 mm
LENGTH 430 mm
WIDTH 600 mm
NUMBER OF TURNS SAW 2800
MAX. DIAMETER SPIRAL 80 mm
MIN. DIAMETER SPIRAL 14 mm
MAX. DIAMETER SPIRAL WIRE 8 mm
PRESSURE COMPRESSED AIR 4 Atm
POWER 0,5 kW FEEDING 380 Volt
WEIGHT 60 kg. WEIGHT WITH PACKING 110 Kg.
SIZES OF THE PACKING 770X 770 X h890
Machine for cutting pieces of hollow spiral (obtained from winding the plate) without having scraps. The machine has got a spirals - holder body, which contains all the necessary adjustments for obtaining the pieces . That is:
- Easy replacement of the spiral - holder pin.
- Adjustment of a radial beat, which determines the arc width of the wanted spiral.
- Adjustment of the perpend icularly of the spiral wire in comparison with the saw.
The saw - holder unit includes the motor, to which a double bearings spindle is integral and it is assembled on a slide, which d e termines the adjustment of the saw cut height. All that sliding on an axial bearings slide. The cut advancement control is pne u matically operated and the speed is adjusted by a hydraulic decelerating device of pressure. The machine is contained in a carter, which collects both the filings and the cut pieces. In the part below there are contained the electric and pneumatic controls.
